Axial piston variable intermediate pressure

CML V** series (Yeoshe)

Variable piston pump, available with side or rear connectors. Alternative to the Sauer OPV1 Voac V1 pumps and pumps.
Parts are used in Sauer OPV1 pumps. Also by construction pumps available

Documentation: yeoshe-v-serie.pdf

Models

Performance	alternative to Sauer	alternative to VOAC	engine displacement	maximum working pressure	see page doc. (download above)
VR15	OPV1 / 015	V1/015	15 cc / rev	250 bar	69
V23	OPV1 / 023	V1/023	23 cc / rev	250 bar	53
V38	OPV1 / 038	V1/038	37.8 cc / rev	250 bar	61
V50	OPV1 / 052	V1/052	51.5 cc / rev	250 bar	65
V70	OPV1 / 070	V1/070	69.7 cc / rev	250 bar	65
arrangements:	pressure compensator		A	(RNU)
	Distance adjustable pressure compensator		CG	(RNF)
	Loadsensing		HL	(RQN)

Continental HPV (R) series

CONTINENTAL variable piston pump, with standard rear connections, optional side terminals and / or construction work.

Variable piston pump, standard with rear connection, optional side connections.

Through drive pumps are available.

Low noise level, high efficiency.

100% alternative for the DENISON PV-pumps.

Models

The HPV-series will gradually be replaced by the HPVR-series this year. This new series piston pump with have a better set of bearings and can go up to a higher pressure.

Following pumps have so far been released: HPVR-6, HPVR-15 and HPVR-29. There are differences in size between the old HPV-pump and the new HPVR-pump, but flange and shaft remain the same. After release of the new pump, the old pump will no longer be available.

Peak pressure of the new HPV-R series: 275 bar.

100% alternative for the DENISON PV-pumps: More information (pdf)

Differences between HPV and HPVR series: PDF

implementation CONTINENTAL	alternative to Denison	engine displacement	continuous operating pressure	Doc.
HPVR-6B35	PV6	14.4 cc / rev	241 bar	pdf
HPV-10B35	PV10	21.1 cc / rev	241 bar
HPVR-15B35	PV15	34.2 cc / rev	241 bar	pdf
HPV-20B35	PV20	42.9 cc / rev	241 bar
HPVR-29B40	PV29	65 cc / rev	275 bar	pdf
Possible controls:	Pressure compensator, Denison C-controller
	Loadsense regulator, Denison L-regulator
	Compensator remotely adjustable, Denison F-controller

Metaris M-A10V-serie

METARIS variable piston pump standard with side, optional rear connections

Through drive possible, SAE or ISO mounting flange. 100% Interchangeable with Rexroth A10V(S)O pump, parts 100% interchangeable as well.

Models

Download pdf

implementation Metaris	alternative to Rexroth	series	engine displacement	continuous operating pressure	peak Press
M-A10V(S)O18	A10V(S)O18	31	18 cc / rev	280 bar	350 bar
M-A10V(S)O28	A10V(S)O28	31	28 cc / rev	280 bar	350 bar
M-A10V(S)O45	A10V(S)O45	31	45 cc / rev	280 bar	350 bar
M-A10V(S)O45	A10V(S)O45	52	45 cc / rev	250 bar	315 bar
M-A10V(S)O60	A10V(S)O60	52	60 cc / rev	250 bar	315 bar
M-A10V(S)O71	A10V(S)O71	31	71 cc / rev	280 bar	350 bar
M-A10V(S)O100	A10V(S)O100	31	100 cc / rev	280 bar	350 bar
M-A10V(S)O140	A10V(S)O140	31	140 cc / rev	280 bar	350 bar
arrangements:	pressure compensator	DR
Distance adjustable pressure compensator	DRG
Loadsensing	DFR / DFR1
power control	DFRL
By building performance	TO**

PVB / PVH / PVQ pompen

Metaris variable piston pump with rear connections, 100% exchangeable with the Vickers PVB pump Compensator options: pressure compensator or with loadsense control.

Fast delivery times.

Models

More information (pdf)

Modelnumber Vickers	Modelnumber Metaris	Displacement	Working pressure
PVB5	MPVB5	10,55 cc/rev	210 bar
PVB6	MPVB6	13,81 cc/rev	140 bar
PVB10	MPVB10	21,1 cc/rev	210 bar
PVB15	MPVB15	33,0 cc/rev	140 bar
PVB20	MPVB20	42,8 cc/rev	210 bar
PVB29	MPVB29	61,6 cc/rev	140 bar
Compensator options: pressure compensator C(M) or with Loadsense CVP

Metaris also offers the parts, such as rotating groups, yokes, sealkits etc. Parts can be used for the repair of the original Vickers pump as well.

Parts can be delivered with a very short lead times!

Variable piston pump series M-PVH, displacement up to 131 cc/rev., 250 bar

The Metaris alternative for the Vickers PVH piston pump; R&S can deliver the complete pump as well as the parts (including parts for the PVH141). The parts can also be mounted in the original Vickers pump. The complete pump is 100% interchangeable.

R&S Hydrauliek can deliver the complete units with pressure compensator or with a loadsense control, with or without thru-drive connection.

Fast delivery times.

Models

More information (pdf)

Model nr. Vickers	Model nr. Metaris	Displacement	Working pressure
PVH57	MPVH57	57,4 cc/rev	250 bar
PVH74	MPVH74	73,7 cc/rev	250 bar
PVH98	MPVH98	98,3 cc/rev	250 bar
PVH106	MPVH106	106,0 cc/rev	250 bar
PVH131	MPVH131	131,1 cc/rev	250 bar
Available compensators: pressure compensator, loadsense; option: thru-drive

Onderdelen voor plunjerpompen

Parts for A10V(S)O pumps like seal kit, rotating groups, valve plates etc. often ex stock.

Parts for PVB and PVH pumps within some working days

Categories

Axial piston variable intermediate pressure

Always stay informed!