To improve your user experience, we use cookies. More information

Piston pumps fixed (Sunfab)

R&S Hydrauliek heeft een uitgebreid programma plunjerpompen, vast en verstelbaar. Slagvolumes zijn verkrijgbaar van 10 tot 270 cc/r en met maximale werkdrukken tot 350 bar continue. Aansluitbeelden SAE en ISO, maar ook DIN PTO montage zit in het programma.

SUNFAB fixed piston pump

SUNFAB fixed displacement piston pump, supplied with ISO flange fitting, standard Buna-N, Viton seals, option high pressure shaft seal.

Up to high rotational speeds suitable, low noise, long life span .  The pump is very similar to the pumps of A2FO Rexroth, and are a good alternative.  Shaft and mounting flange are the same, often the oil ports alos correspond.

Download pdf 

Merk: SUNFAB HYDRAULIEK
Models

  

SUNFAB Model Alternative to Rexroth ISO 4-hole Displacement Operating pressure continuous
SCP-ISO 012 A2FO12 80 mm 12.6 cc / rev 350 bar
SCP-ISO 017 A2FO17 80 mm 17 cc / rev 350 bar
SCP-ISO 025 A2FO23 / 28 100 mm 25.4 cc / rev 350 bar
SCP-ISO 034 A2FO32 100 mm 34.2 cc / rev 350 bar
SCP-ISO 040 - 125 mm 41.2 cc / rev 350 bar
SCP-ISO 047 A2FO45 125 mm 47.1 cc / rev 350 bar
SCP-ISO 056 A2FO56 125 mm 56 cc / rev 350 bar
SCP-ISO 064 A2FO63 125 mm 63.5 cc / rev 350 bar
SCP-ISO 084 A2FO80 140 mm 83.6 cc / rev 350 bar
SCP-ISO 090 A2FO90 140 mm 90.7 cc / rev 350 bar
SCP-ISO 108 A2FO107 160 mm 108 cc / rev 350 bar
SCP-ISO 130 A2FO125 160 mm 130 cc / rev 300 bar


PTO piston pump-DIN shaft (SAP) 400 bar

Fixed displacement piston pump for mobile equipment, shaft: DIN 5462, suction: flange connection, pressure: thread. Suited for high speed, low noise level, long life time.

This is the new series DIN-pump for SUNFAB SC / SCP series, exchangeable. 

SAPT-pump, for 90 and 130 cc/rev displacement and max. 300 bar

See the SUNFAB video: introduction SAP-pump

Pump with aluminum body, light weight pump 

Documentation  SAP pump:  Pdf. SAP Download doc. DIN 5462 pumps SAPT: pdf-SAPT 

Merk: SUNFAB HYDRAULIEK
Models



Model Alternative for VOAC Displacement working pressure max.
SAP 012 12,6 cc/rev 400 bar
SAP 017 17 cc/rev 400 bar
SAP 025 F1-25 25,4 cc/rev 400 bar
SAP 034 34,2 cc/rev 400 bar
SAP 040 F1-41 41,2 cc/rev 400 bar
SAP 047 47,1 cc/rev 400bar
SAP 056 F1-56 56 cc/rev 400 bar
SAP 064 F1-61 63,5 cc/rev 400 bar
SAP 084 F1-81 83,6 cc/rev 400 bar
SAP 108 F1-101 108 cc/rev 400 bar
SAPT 090 90 cc/rev 300 bar
SAPT 130 130 cc/rev 300 bar

SUNFAB SAP pump, optimised for higher speed

SUNFAB SAP-pump 84 and 108 cc/rev, optimised for higher speed, max pressure: 400 bar

Speed for both displacements:

1800 rpm continuous

2300 rpm limited

Merk: SUNFAB HYDRAULIEK
PDF

Sunfab fix piston pump-SAE

Sunfab fixed piston pump, SAE mounting flange B or C (4 bolt mounting) with splined shaft, suction: flange connection with suction pipe, pressure connection: BSP-thread 

High speed, low noise level

For documentation:Download doc. SAE pompen: pump

Merk: SUNFAB HYDRAULIEK
Models
Model Displacement  Working pressure max.
SCP-SAE 012 12,6 cc/rev  400 bar
SCP-SAE 017 17 cc/rev. 400 bar
SCP-SAE 025 25,4 cc/rev. 400 bar
SCP-SAE 034 34,2 cc/rev. 400 bar
SCP-SAE 040 41,2 cc/rev.  400 bar
SCPD-SAE 047 47,1 cc/rev. 400 bar
SCP-SAE 056 56 cc/rev.  400 bar
SCPD-SAE 064 63,5 cc/rev.  400 bar
SCP-SAE 084 83,6 cc/rev. 400 bar
SCP-SAE-108 108 cc/rev.  400 bar


SUNFAB fixed piston pump-SAE

Sunfab fix piston pump, SAE mounting flange B or C (4 bolt mounting) with splined shaft, suction: flange connection with suction pipe, pressure connection: BSP-thread 

High speed, low noise level

For documentation:Download doc. SAE pumps: pdf-SCP-SAE

Models
Model Displacement  Working pressure max. 
SCP-SAE 012 12,6 cc/rev.  400 bar
SCP-SAE 017 17 cc/rev.  400 bar
SCP-SAE 025 25,4 cc/rev.  400 bar
SCP-SAE 034 34,2 cc/rev. 400 bar
SCP-SAE 040 41,2 cc/rev. 400 bar
SCP-SAE 047 47,1 cc/rev.  400 bar
SCP-SAE 056 56 cc/rev.  400 bar
SCP-SAE 064 63,5 cc/rev. 400 bar
SCP-SAE 084 83,6 cc/rev.  400 bar
SCP-SAE-108 108 cc/rev. 400 bar

Sunfab SAP fixed displacement piston pump

Fixed displacement piston pump for mobile equipment, shaft: DIN 5462, suction: flange connection, pressure: thread. Suited for high speed, low noise level, long life time.

This is the new series DIN-pump for SUNFAB SC / SCP series, interchangeable. 

SAPT-pump, for 90 and 130 cc/rev displacement and max. 300 bar

See the SUNFAB video: introduction SAP-pump

Pump with aluminum body, light weight pump 

Documentation  SAP pump:  Pdf. SAP Download doc. DIN 5462 pumps SAPT: pdf-SAPT

Merk: SUNFAB HYDRAULIEK
Models
Model Alternative for VOAC Displacement Max working pressure 
SAP 012 12,6 cc/rev.  400 bar
SAP 017 17 cc/rev. 400 bar
SAP 025 F1-25 25,4 cc/rev.  400 bar
SAP 034 34,2 cc/rev.  400 bar
SAP 040 F1-41 41,2 cc/rev.  400 bar
SAP 047 47,1 cc/rev.  400 bar
SAP 056 F1-56 56 cc/rev.  400 bar
SAP 064 F1-61 63,5 cc/rev. 400 bar
SAP 084 F1-81 83,6 cc/rev. 400 bar
SAP 108 F1-101 108 cc/rev.  400 bar
SAPT 090 90 cc/rev. 300 bar
SAPT 130 130 cc/rev.  300 bar

SAE/DIN double piston pump 350 bar, fixed displ.

SUNFAB double piston pump, suitable for two directions of rotation, extremely low noise level. Delivereable with DIN power take-off shaft for construction and with SAE flange fitting / shaft

Download pdf:

 SLPD-DIN

 SLPD-SAE

New: Available as single pump for two directions of rotation, for documentation download here. Also available with SAVTEC valve on suction, thus suitable for higher speeds.

Merk: SUNFAB HYDRAULIEK
Models
Flange/shaft DIN  Flange/shaft SAE Pump displacement P1 Pump displacement P2 Max. Pressure Rpm weight
SLPD-DIN 20/20 - 20.3 cc / rev 20.3 cc / rev 350 bar 2200 rpm 22 kg
SLPD-DIN 28/28 - 27.5 cc / rev 27.5 cc / rev 350 bar 1800 rpm 22 kg
SLPD-DIN 40/20 SLPD-SAE 540/20 40.7 cc / rev 20.3 cc / rev 350 bar 2200 rpm 22 kg
SLPD-DIN 35/35 SLPD-SAE 535/35 33.9 cc / rev 33.9 cc / rev 330 bar 2200 rpm 22 kg
SLPD-DIN 56/28 - 54.9 cc / rev 27.5 cc / rev 350 bar 1800 rpm 22 kg
SLPD-DIN 46/46 SLPD-SAE 546/46 45.8 cc / rev 45.8 cc / rev 330 bar 1800 rpm 22 kg
SLPD-DIN 53/53 SLPD-SAE 553/53 52.5 cc / rev 52.5 cc / rev 330 bar 1600 rpm 22 kg
SLPD-DIN 64/32 SLPD-SAE 564/32 63.0 cc / rev 31.5 cc / rev 350 bar 1600 rpm 22 kg

This pump is also available with SAVTEC electrical or pneumatic actuated valve on the suction side, thus the pump may run at a higher speed.  download pdf

SUNFAB Twin-flow piston PTO

SUNFAB Twinflow Pump

Fixed displacement double pump with DIN shaft, 350 bar continuous working pressure NEW: Double pump 2 x 75 cc/rev

NEW: Double pump SCPD 70/36, option: bypass valve

See the video Sunfab: Dual Flow Pump 76/76


Merk: SUNFAB HYDRAULIEK
Models

View the Sunfab video:


Option: Bypass valve for applications with a higher speed

Pumps without by-pass valve
Model Displacem. P1 Displacem. P2 Work Pr.cont. Max.speed pdf
SCPD 56/26 56 cc/rev 26 cc/rev 350 bar 1850 rpm download
SCPD 76/76 75 cc/rev 75 cc/rev 350 bar 1500 tpm download
SCPD 70/36 69,2 cc/rev 36,4 cc/rev 350 bar 1800 rpm download
Pompen met omloopklep, aangebracht ventiel rechtstreeks aan eindkap  Maximale snelheid 2700 opm bij P1 en P2 bij nuldruk
Model Displacem. P1 Displacem. P2 Work Pr.cont. Max. speed pdf
SCPD 56/26 56 cc/rev 26 cc/rev 350 bar 2700 rpm (unloaded) download
SCPD 70/36 69,2 cc/rev 36,4 cc/rev 350 bar 2550 rpm (unloaded download

SUNFAB Double piston pump

Double piston pump for CW and CCW rotation, very low noise level, available with DIN shaft for mounting on a PTO or with a mounting flange for SAE with splined shaft.

Download pdf: SLPD-DIN SLPD-SAE

Models


DIN shaft design SAE design Displacement P1 Displacement P2 Working pressure Speed Weight
SL 20/20 – 20,3 cc/rev 20,3 cc/rev 350 bar 2200 rpm 22 kg
SL 28/28 – 27,5 cc/rev 27,5 cc/rev 350 bar 1800 rpm 22 kg
SL 40/20 SL 540/20 40,7 cc/rev 20,3 cc/rev 350 bar 2200 rpm 22 kg
SL 35/35 SL 535/35 33,9 cc/rev 33,9 cc/rev 330 bar 2200 rpm 22 kg
SL 56/28 – 54,9 cc/rev 27,5 cc/rev 350 bar 1800 rpm 22 kg
SL 46/46 SL 546/46 45,8 cc/rev 45,8 cc/rev 330 bar 1800 rpm 22 kg
SL 53/53 SL 553/53 52,5 cc/rev 52,5 cc/rev 330 bar 1600 rpm 22 kg
SL 64/32 SL 564/32 63,0 cc/rev 31,5 cc/rev 350 bar 1600 rpm 22 kg

We can also deliver this pump with a SAVTEC pneumatic valve on the suction port, for higher speed applications. 

Download pdf

HS-Penta

HS PENTA

HS PENTA, a Company which has specialized in the engineering and manufacturing of telescopic cylinders for more than 20 years, can fulfil the requirements of a continually evolving market thanks to the massive investment in research, constant up-dating of hi-tech machines and methods of production. View their website at: http://www.hspenta.it/

Spare parts for Denison-style vane pump

Veljan spare parts for mounting in the orignal Veljan vane pumps and for mounting in the original Parker Denison vane pumps. R&S Hydrauliek carries inventory for all standard vane pumps series T6 and T7. For single, double and tripple pumps we stock the c

Merk: MICO